Story

For people who love their dogs, and their homes.

Why KINNE exists, and why we made the bed the way we did.

A white dog smiling from the KINNE Bed, paws on the bolster Edition 01 · Oat
Chapter 01 Origin

I started KINNE to make a dog bed that works as well as it looks.

I started KINNE because I couldn't find an orthopedic bed that actually worked for my Japanese Spitz. He has a luxating patella, which means his kneecap slips out of place. A bed can't fix that, but the right one takes the pressure off his joints, and I want him enjoying his walks for as long as possible.

Every bed I tried flattened within months, until he was basically lying on the floor.

So I started designing one myself. I wanted gel-infused memory foam on top to keep him cool and to spread his weight off his hips and elbows, with a firm support core underneath so his joints wouldn't sink through over time. It also had to look like it belonged in a home, with a cover tough enough to take years of clawing and circling.

It took three rounds of samples to get right.

Your dog spends 12 to 14 hours a day lying down. That's a long time on something that flattens.
Chapter 02 Materials

Everything in the bed is named, so you know exactly what your dog is lying on.

When I was looking for a bed, most just said "orthopedic" and left it there. There was no way to tell what was inside, or whether it would hold up.

The cover is a polyester-linen weave rated past 50,000 double rubs, well beyond the 30,000 heavy-duty commercial seating is rated for. It's the part your dog lies against, so the fabric is certified to OEKO-TEX STANDARD 100. The foam underneath is CertiPUR-US certified, and the bed is tested to TB 117-2013, California's smolder-resistance standard for upholstered furniture.

Cover · Polyester-linen weave

70% polyester · 20% viscose · 10% linen

>50,000 double rubs · Cover fabric certified to OEKO-TEX STANDARD 100

Core · 5 in / 2 layers

2 in gel-infused memory foam over a 3 in support core · CertiPUR-US

Firm enough that your dog's joints don't sink to the floor.

Liner · TPU-backed

A water-resistant layer between cover and foam that wipes clean.

Hardware

YKK concealed zip. The cover comes off in one pass for the wash.

The Oat cover's polyester-linen weave, close up
The waterproof liner over the gel-memory layer and support core
Chapter 03 The edition

Two sizes and one cover, so we could get each one right.

Edition 01 comes in two sizes and one color, Oat, a warm neutral that sits well next to wood, linen and stone. Starting with one cover meant we could put everything into getting one weave right, instead of spreading ourselves across several.

Your dog might be twice his size. A heavier dog puts more weight through every joint each time it lies down, so the foam has to work even harder, and I made sure both sizes are built for that.

Standard 37 × 29 in Up to 31 in nose to tailUp to 55 lb
Large 45 × 35 in Up to 39 in nose to tailUp to 90 lb
The cover One cover, in Oat. Unzips and machine-washes at 30°C.
Chapter 04 Closing

Built for the dog, designed for you.

KINNE

They're only with us for a short time. KINNE designs high-performance products to keep them comfortable, and doing what they love, for as long as possible.

Orthopedic: 5 in of CertiPUR-US foam.Foam warranted for 10 years against dropping below 3 in.Cover fabric certified to OEKO-TEX STANDARD 100.100 nights to decide.